connect the system controller

Congratulations on the purchase of your COMMENCAL META POWER BOSCH. Here we offer some help so you can build it up and get out there!


IMPORTANT: Please read the BOSCH manual carefully beforehand.

DO NOT switch on the battery until you’ve charged it 100% (final steps).

1

To connect the BOSCH system, the System Controller on top tube must be plugged.

Unscrew the bolt with a Torx T10 key.

2

Remove the System Controller from the top tube.

3

Plug the wire in the System Controller. White marks must be aligned.

4

Install the System Controller in the top tube from the front part.

5

Tighten the bolt with a Torx T10 key, at 1,5N.m

36

You will find a dedicated tutorial by scanning the QR Code.