COMMENCAL META TR V4 OHLINS EDITION ASH GREY
- TECHNICAL INFO
When we developed the META TR 29, our intentions were clear - to make a bike that performs very well uphill but that also retains the COMMENCAL downhill DNA. We got the result we wanted thanks to a few key points:
- Large 29-inch wheels.
- Reworked and modifiable kinematics making the bike more dynamic.
- A straighter seat angle (and reduced offset).
The result is a particularly harmonious bike, a formidable pedaller and ideal companion for long active rides. The TR is seamlessly capable of transcending from uphill to downhill and soaking up all types of lumps and bumps in between. Thanks to 140mm of rear travel and the 150mm or 160mm fork, it tackles most obstacles without hesitation. Plus, the TR shows liveness and is playful when it comes to the terrain and pumping for speed etc.
Mike Kazimer, reporter at Pinkbike, describes the META TR 29 as one of the funnest bikes he's ridden!
The stiffness of the frame is always the subject of much attention. The use of double-row Enduro Bearings allows a more homogeneous deformation of the frame without the loss of stiffness via the bearings.
In addition to all this in-depth work, like on our META POWER TR, META SX and CLASH bikes, we now offer a Flip Chip on the shock absorber extension in order to more acutely adjust the geometry, and therefore fit your personal style! This system means you can influence the height of the bottom bracket as well as the steerer and saddle angles within seconds. Depending on what you want, effectively, you can choose between a lively bike perfect for big pedalling missions, or more progressive bike ideal for days in bike park or on more committed lines.
META TR V4 ÖHLINS EDITION
The META TR V4 ÖHLINS Edition has been designed to highlight the high-end components that adorn it. Shiny Ash Grey paint shows off the suspension and makes this bike a real collector's item.
This bike is intended for seriously committed riders. It's a bike that's made to perform. You'll find the best enduro suspension from the Swedish brand ÖHLINS:
- The TTX1 Air shock can be precisely adjusted to your needs.
- The RXF36 fork is precise and holds excellently when things get steep.
The rest of the components have been carefully selected specifically for this bike:
- The SHIMANO XT 4-piston brakes with 200mm rotors offer excellent heat management for powerful and long braking.
- The choice of wheels is important on a bike of this category, so we chose the DT SWISS XM1700 Spline for their excellent weight/liveliness/reliability ratio.
This META TR V4 ÖHLINS is as formidably efficient for quick trail laps as it is for several hour missions!
*Please note that bike specs are subject to change without prior notice.
3,7 kg / 8.15 lb
210 x 55 mm
Piggy back shock compatible
20 x 10 mm
Recommended/max. fork height
551 mm / 571 mm
ZS44 / ZS56
Maximum tyre dimension (etrto)
Disc brake standard
POSTMOUNT 200 mm
Rear rotor max. size
Seatpost/seat clamp diameter
34,9 mm / 38,5 mm
Bottom bracket type
Rear hub compatibility
12 x 148 mm
2022 Meta TR, 140 mm travel
29'', Alloy 6066, triple butted tubes, T4, T6. Enduro bearings
OHLINS TTX1 Air
210 x 55 mm, climb mode, Adjustable HSC (High-Speed Compression), LSC (Low-Speed Compression) and Rebound damping
OHLINS RXF36 m.2 Air, 150 mm travel
29", TTX 18 damper, Ramp Up chamber, LSC, HSC, rebound, Boost (15 x 110 mm), 44 mm offset
ACROS ZS44 / ZS56
Alloy cups, sealed bearings
RIDE ALPHA Freeride 40
40 mm extension, 31,8 mm
RIDE ALPHA R20 760 on S - RIDE ALPHA R27 780 on M / L - RIDE ALPHA R27 800 on XL
31.8 mm, 760 mm width, 20 mm rise, Alloy 6061 on S - 31.8 mm, 780 mm width, 27 mm rise, Alloy 6061 on M / L - 31.8 mm, 800 mm width, 27 mm rise, Alloy 6061 on XL
ODI Elite Motion
Soft pro compound, single clamp, black
SHIMANO XT, 4 pistons, I-Spec EV compatible
Rotor: Delivered with Shimano or Galfer discs.
SHIMANO XT, 170 mm crank arms, Boost
Chainring: SHIMANO XT, 32t, Dynamic Chain Engagement + Technology
DT SWISS XM 1700 29''
29'', 28h, 30mm inner width
Rear: DT SWISS 350 - Front: DT SWISS 350
Rear: 28h, sealed bearings, 12 x 148 mm, Micro Spline, 36t ratchet, black - Front: 28h, sealed bearings, 15 x 110 mm, black
DT SWISS Competition
Straightpull, 2.0-1.8-2.0mm, double butted, stainless, with Nylok, black
Rear: SCHWALBE Nobby Nic - Front: SCHWALBE Magic Mary
Rear: 29" x 2.35", Super Trail, Addix Soft, Tubeless Ready - Front: 29" x 2.4", Super Trail, Addix Soft, Tubeless Easy
KS Lev Integra
34.9 mm, travel: 125 mm on S, 150 mm on M, 175 mm on L, 200 mm on XL, SouthPaw alloy remote
SDG Bel Air V3 Atmos
15 kg / 33.06 lb
Average weight for S size, without pedals. Weight may differ slightly due to manufacturing tolerances.
Down tube protector, chainstay protector, seatstay protector