- 2027 RANGE
- BIKES
- COMPONENTS
- APPAREL
- SNOW
- CMNCL WORLD
- CMNCL VILLAGE
- RENTAL
- B2B
- Where to find us
- Login
Make your jersey unique by adding your name for an additional € 15.Simply indicate your name in the "Comments" section during the final step of your order. We will then contact you to finalize the personalization and its payment.
You can place your order and have the COMMENCAL product of your choice delivered directly to your nearest store. Your store will need to contact our B2B sales department to register your order. Your store receives the product and you will pay directly with them. The store will inform you of the receipt of your order.
We have been working on 29/27 Mullet bikes for 3 years now with our different DH teams. This work has allowed us to understand that to transform a regular bike with the same sized wheels into a bike with different sized wheels, it isn't effective to just throw a 27-inch wheel on the back. The geometry and kinematics of the bike must be completely reworked and it is thanks to this experience that we are now able to present the most successful version of the META V4 we've ever produced, the META SX!
Equipping this META SX with different sized 29/27-inch wheels is not the result of a trend that we're following. Quite simply, this way the bike is much more balanced, specifically relating to grip on the front and back - the large 29-inch wheel on the front allows more confidence and rolling capacity whilst the 27.5-inch rear wheel offers more manoeuvrability and responsiveness.
The result is a bike that is more agile and easier in the steeps, more efficient under braking and more dynamic when pushing hard.
Once again, our choice to work with Aluminium has allowed us to accompany this change in wheel size with an adjustment of the geometry. A shorter 10mm reach, a straightened steerer angle and extended (10mm) chain stays mean that the rider is naturally repositioned in the centre of the bike and will therefore have the ability to be more precise and agile in their technique.
Undoubtedly, one of the points that has changed the most is the way the suspension works. Apart from the kinematics which have been reworked to provide more liveliness, we've made a point of managing the stiffness of the rear triangle. Through new double row Enduro Bearings, eliminating any deformation, the new META SX offers perfect deformation/rigidity management to provide grip, comfort and performance.
In addition to all this in-depth work, as on our META POWER TR and META TR models, we now offer a Flip Chip on the shock extension in order to be able to better adjust the geometry, and therefore fit with your style! This system also means you can adapt the height of the bottom bracket as well as the steerer and saddle angles within seconds. Depending on your preferences, you can have the choice between a dynamic bike that's perfect for big pedalling trips, or a more progressive version which is ideal for days in the bike park or on more committed trails.
Finally, we have worked on a detail that makes the difference; the finished look.
The welds have been the subject of meticulous work to reduce them as much as possible without affecting the solidity of the frame. The cable routing is neat for easier maintenance, the cables being easily accessible in the down tube, while grommets are placed at the ends to give perfect support and prevent penetration of water and mud.
Installing a bottle cage has also been made easy.
*Please note that bike specs are subject to change without prior notice.
ENDURO 27''/29''
AL 6066 T4, T6
3,9 kg / 8.59 lb
160 mm
230 x 62,5 mm
Yes
20 x 10 mm
586 mm / 596 mm
TAPERED 1-1/8" / 1-1/2"
ZS44 / ZS56
68-584
POSTMOUNT 200 mm
220 mm
34,9 mm / 38,5 mm
BB92
ISCG 05
12 x 148 mm
Meta SX, 160 mm travel
29''-27.5'', Alloy 6066, triple butted tubes, T4, T6. Enduro bearings
FOX Float X2 Factory
230 x 62.5 mm, HSC, LSC, HSR, LSR, 2-postion adjustment
FOX 38 Factory, 170 mm travel
29", Grip 2 damper, HSC, LSC, HSR, LSR, Boost (15 x 110 mm), 44 mm offset, 2 Tokens
CANE CREEK Series 40 ZS44/ZS56
Alloy cups, sealed bearings
TRUVATIV Descendant
40 mm extension, 35 mm
TRUVATIV Descendant
35 mm, 800 mm width, 25 mm rise, Alloy ,Black
RIDE ALPHA DH
Ultra-soft compound, single clamp, black
SHIMANO XT, 4 pistons, I-Spec EV compatible
Rotors: SHIMANO SM-RT86, 6-bolt, 203 mm
SRAM GX Eagle
12s
SRAM GX Eagle
12s
SRAM DUB
Pressfit
SRAM XX1 Eagle, 170 mm crank arms, Carbon, DUB, Boost
Chainring: SRAM XX1 Eagle, 32t, Narrow-Wide
KMC X12
12s, Silver/Black
SRAM GX Eagle
12s, 10-52t
Rear: CRANKBROTHERS Synthesis Enduro Alloy - Front: CRANKBROTHERS Synthesis Enduro Alloy
Rear: 27,5", 32 holes, 29.5 mm inner width - Front: 29", 28 holes, 31.5 mm inner width
Rear: FORMULA MSL-148A - Front: FORMULA DC-711
Rear: 28h, sealed bearings - Front: 28h, sealed bearings
SAPIM D-Light
J-Bend, 2.0-1.65-2.0mm, double butted, stainless, with Nylok, black
Rear: SCHWALBE Big Betty - Front: SCHWALBE Magic Mary
Rear: 27.5"x2.4", Super Gravity, Addix Soft, Tubeless Ready - Front: 29"x2.4", Super Gravity, Addix Ultra Soft, Tubeless Ready
RockShox Reverb
34.9 mm, travel: 200 mm, Hydraulic lever
FIZIK Terra Alpaca X5
145 mm width, S-alloy rails
- kg / - lb
Average weight for S size, without pedals. Weight may differ slightly due to manufacturing tolerances.
No
Dust Yellow
Matte Finish
Down tube protector, chainstay protector, seatstay protector
*Please note that bike specs are subject to change without prior notice.
A commercial question, about your order or a technical advice?
Contact our team
Our vision of customer service
More information
A commercial question, about your order or a technical advice?
Contact our team
Our vision of customer service
More information