connect the system controller
connect the system controller
Congratulations on the purchase of your COMMENCAL META POWER BOSCH. Here we offer some help so you can build it up and get out there!
IMPORTANT: Please read the BOSCH manual carefully beforehand.
DO NOT switch on the battery until you’ve charged it 100% (final steps).
1
1
To connect the BOSCH system, the System Controller on top tube must be plugged.
Unscrew the bolt with a Torx T10 key.
2
2
Remove the System Controller from the top tube.
3
3
Plug the wire in the System Controller. White marks must be aligned.
4
4
Install the System Controller in the top tube from the front part.
5
5
Tighten the bolt with a Torx T10 key, at 1,5N.m
36
36
You will find a dedicated tutorial by scanning the QR Code.
