MADE TO GO DOWN
The META SX V4 is made to engage and go fast.
It features a generous wheelbase, reworked frame and kinematics for 29/27.5-inch wheels; perfectly combining stability with liveliness. This is the mountain bike we all need for riding the steepest, most technical terrain and holding lines like no other in the bike park.
ENDURO
FREERIDE
170mm / 160mm
29" / 27.5"
FROM BIKE PARK TO SINGLE TRACK
The META SX V4 is designed for use in the bike park and more widely in enduro.
Stability and support are paramount when tackling jumps or technical sections and the mullet wheel set-up means the bike will more than cope with the slope.
CONTACT SYSTEM EXPLAINED
The CONTACT SYSTEM is our suspension kinematic.
We have been using it for over twenty years and have continued to develop it. Combined with our geometries it ensures excellent performance from our mountain bikes.
Stable while the suspension is active, it allows us to optimise the behaviour of the META SX V4.
Small impacts are particularly well filtered and progressiveness is increased to perfectly absorb jump landings.
Whether going uphill or downhill, the CONTACT SYSTEM enables you to feel the terrain, while giving you maximum control.
PRECISE AND STIFF
The rear triangle of the META SX V4 has been stiffened by the addition of a bridge between the seat stays for more precision and better control. The chain stays are elongated to balance the grip between the front and rear. Their lengths vary depending on the size of the bike and to match the riders’ size.
ADAPTABLE KINEMATICS
In order to be able to adapt the behaviour of the bike depending on the nature of the ride, the META SX V4 is equipped with a flip chip which affects the head angle, the height of the bottom bracket and the length of the chain stays.
High position for pedalling sessions.
Low position when you have to face the slope.
IMPROVED FRAME PROTECTORS
Located at strategic points on the frame, these protectors have been designed to limit impact, noise, and splashes. Chain stays, seat stays, and the down tube are all perfectly protected.
PRECISE AND STIFF
The rear triangle of the META SX V4 has been stiffened for more precision and better control. The chain stays are elongated to balance the grip between the front and rear. Their lengths vary depending on the size of the bike and to match the riders’ size.
ADAPTABLE KINEMATICS
In order to be able to adapt the behaviour of the bike depending on the nature of the ride, the META SX V4 is equipped with a flip chip which affects the head angle, the height of the bottom bracket and the length of the chain stays.
High position for pedalling sessions.
Low position when you have to face the slope.
IMPROVED FRAME PROTECTORS
Located at strategic points on the frame, these protectors have been designed to limit impact, noise, and splashes. Chain stays, seat stays, and the down tube are all perfectly protected.
DESIGNED TO ENGAGE
On the META SX V4 everything is designed to engage. When it’s time for the downhill the capabilities of the bike are maximised thanks to our know-how in terms of kinematics and geometry.
The mullet geometry is inspired by our downhill bike with long chain stays to balance the grip between the front and rear wheel axles.
29’’/27.5’’ WHEELS
The 29/27.5 inch wheel assembly of the META SX V4 improves its stability on descents, facilitates braking and gives it more dynamism when changing direction.
DESIGNED TO PEDALING
The seat angle is steep enough to be effective when riding uphill, but not too steep that it’s uncomfortable when pedalling on the flat. The rear triangle is compact to avoid friction with the heels and calves.
OPTIMIZED RELIABILITY
Bearings are oversized to handle big landings. The cables pass as close as possible to the main pivot point to reduce friction and wear.
All lengths in millimeters.
OUR COMMITMENT
Aluminium is an advanced material and perfect for the performance.
Finally, aluminium is recyclable and infinitely recoverable. This allows us to deliver the highest quality responsibly, ethically and with respect for the people who work with us.
Clean lines, optimization of lateral and vertical rigidities, junctions, shapes and weight for greater efficiency, our bikes are the result of hundreds of production stages for a result that cannot be compared with the manufacture of a carbon frame.
Our bikes combine manufacturing know-how with high-end technology. Our goal is uncompromised.
The META SX V4 would make an excellent bike park rig, as the burly bike would almost definitely hold up well over time and the stable, dampened ride feels great on chunky trails and steep, rocky tech. It’s also a fair option for someone who wants to race enduro.
Alicia LEGETT
STRAIGHT TO THE LINES
The META SX V4 is synonymous with commitment.
As comfortable riding enduro as the bike park. It’s a weapon for riding the most technical lines.